Changes to Step #2
Step Lines
| + | [title] Remove the rear cover |
|---|---|
| + | [* red] One side at a time, insert a pick next to the nosepiece, slide it to the edge and pry. |
| + | [* black] When both sides are loose, carefully lift the cover out. |
| + | [* icon_caution] The proximity sensor is still connected, so be careful not to rip the flex cable. |
| + | [* black] Lift the clip and pull the flex cable out. It is lightly adhered to the headset. |
Image 1
No previous image
Added
Image 2
No previous image
Added