Changes to Step #4
Edit by Sarah Westberg —
Edit approved by Sarah Westberg
- Before
- After
- Unchanged
Step Lines
| - | [* black] Use two fingers to grasp the top of the 5-pin connector under the edges and slowly lift the connector. If it is difficult wiggle the plug slightly. |
|---|---|
| + | [* black] Use two fingers to grasp the top of the 5-pin connector under the edges and slowly lift the connector. If it is difficult, wiggle the plug slightly. |
| [* icon_caution] Do not pull on the wires. | |
| [* black] Remove the cable from around the circuit board and from the hole on the front of the mouse. |