Changes to Step #2
Edit by Clark —
Edit approved by Alex Diaz-Kokaisl
- Before
- After
- Unchanged
Step Lines
| - | [* red] Remove two hex screws on either side of the gimbal |
|---|---|
| - | [* orange] Remove two smaller hex screws from the covers under the front arms |
| + | [* red] Remove two hex screws on either side of the gimbal. These are 1.5 mm and the same length as the 6 top cover screws. |
| + | [* orange] Remove two smaller hex screws from the covers under the front arms. These are 1.5 mm and SHORTER than the prior screws. |