Changes to Step #6
Edit by Jamie Bell —
Edit approved by Jamie Bell
- Before
- After
- Unchanged
Step Lines
| [title] Desolder the arm wires | |
| [* red] Desolder the larger gray motor wire running to the arm to be replaced | |
| [* orange] Desolder the larger white motor wire | |
| [* yellow] Desolder the larger black motor wire | |
| [* light_blue] Desolder the smaller black LED wire | |
| [* violet] Desolder the smaller white LED wire | |
| [* icon_note] The marked wires are for the right arm. The wires to desolder when replacing the left arm are the mirror image of the ones shown here. | |
| + | [* icon_reminder] Don't forget that plastic has a tendency to melt when exposed to heat! I may or may not have disregarded this fact and put a mark on my drone... |