Changes to Step #12
Edit by Jamie Bell —
Edit approved by Jamie Bell
- Before
- After
- Unchanged
Step Lines
| + | [* black] Use a metal pry tool or flat head screwdriver to lift out the spring-loaded hinge |
|---|---|
| + | [* icon_note] The spring in this hinge makes it difficult to reseat during reassembly. The easiest way I found to replace it was to fold the arm back into the closed position, and then grab across the top of the hinge with the very tip of a pair of needle nose pliers, using the pliers to rotate the hinge into position and press it down into place. |
Image 1
No previous image
Added
Image 2
No previous image
Added