Changes to Step #3
Edit by Robert Boyd —
Edit approved by Robert Boyd
- Before
- After
- Unchanged
Step Lines
| [* red] Use a 9/16 inch socket to remove the two nuts securing the upper flange bearing to the frame. | |
| [* icon_note] If you are unable to fit a socket on the nuts due to the cam shaft pulley, try using a wrench. | |
| - | [* icon_note] If the bolts spin without loosening, use a 9/16 inch wrench to hold the bolt head from underneath. |
| + | [* icon_note] If the bolts spin without loosening, use a 9/16 inch wrench to hold the bolt head from underneath. |