Changes to Step #2
Edit by Robert Boyd —
Edit approved by Robert Boyd
- Before
- After
- Unchanged
Step Lines
| [title] Remove the back panel screws | |
| - | [* red] Use a T8 Torx driver to remove the two 10 mm-long screws. |
| + | [* red] Use a T8 Torx driver to remove the two 10 mm-long screws securing the back panel to the bottom panel. |
| [* icon_note] Throughout this repair, [product|IF145-167-4|keep track of each screw] and make sure it goes back exactly where it came from. |