Changes to Step #5
Edit by Robert Boyd —
Edit approved by Robert Boyd
- Before
- After
- Unchanged
Step Lines
| [title] Remove the plastic case | |
| [* black] With the recently-opened side facing you, pull the two bottom-rear corners of the plastic housing away from each other. | |
| [* black] While pulling the corners apart, slide the back panel towards the bottom of the device. This releases the back panel from underneath the clips on the back of the plastic case. | |
| [* icon_note] The back panel should now settle on top of the clips on the back of the plastic case. | |
| [* icon_note] The back panel is permanently attached to the aluminum chassis. | |
| - | [* icon_caution] Do not attempt to fully remove the chassis from the plastic case |
| + | [* icon_caution] Do not attempt to fully remove the chassis from the plastic case with this technique. You may risk breaking your case. |