Fix Your Stuff Community Store

Changes to Step #2

Edit by Robert Boyd —

Edit approved by Robert Boyd

Before
After
Unchanged

Step Lines

-[* black] Use a spudger to loosen the Wifi connectivity board.
- [* icon_caution] Do not pry from the bottom or sides of the Wifi connectivity board as it may bend the connector.
-[* black] Pull the Wifi connectivity board straight out to disconnect it from the chassis.
+[* black] Use a spudger to loosen the Wi-Fi board.
+ [* icon_caution] Do not pry from the bottom or sides of the Wi-Fi board as it may bend the connector.
+[* black] Pull the Wi-Fi board straight out to disconnect it from the chassis.