Changes to Step #1
Edit by Sam Omiotek —
Edit approved by Sam Omiotek
- Before
- After
- Unchanged
Step Lines
| + | [title] Desolder the motherboard from the vibration motors |
|---|---|
| + | [* black] Flip over the controller and motherboard. |
| + | [* black] Use a soldering iron to desolder the vibrator motor wires from the motherboard: |
| + | [* red] Two red wires |
| + | [* black] Two black wires |
| + | [* icon_reminder] To avoid confusion, solder the red wires back into place first. They belong next to the two ***R'***s on the motherboard and are closest to the edge. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added