Fix Your Stuff Community Store

Changes to Step #1

Edit by Sam Omiotek —

Edit approved by Sam Omiotek

Before
After
Unchanged

Step Lines

[title] Desolder the motherboard from the vibration motors
[* black] Flip over the controller and motherboard.
[* black] Use a soldering iron to desolder the vibrator motor wires from the motherboard:
[* red] Two red wires
[* black] Two black wires
-[* icon_reminder] To avoid confusion, solder the red wires back into place first. They belong next to the two ***R'***s on the motherboard and are closest to the edge.
+[* icon_reminder] To avoid confusion, solder the red wires back into place first. They belong next to the two ***R***s on the motherboard and are closest to the edge.