Changes to Step #1
Edit by Sam Omiotek —
Edit approved by Sam Omiotek
- Before
- After
- Unchanged
Step Lines
| - | [title] Desolder the |
|---|---|
| + | [title] Desolder the vibration motors |
| [* black] Flip over the controller and motherboard. | |
| [* black] Use a soldering iron to desolder the vibration motor wires from the motherboard: | |
| [* red] Two red wires | |
| [* black] Two black wires | |
| [* icon_reminder] During reassembly, remember to solder the wires back into the same position. The red wires belong closest to the edge and next to the ***R***s on the motherboard. |