Changes to Step #1
Edit by Spencer Day —
Edit approved by Spencer Day
- Before
- After
- Unchanged
Step Lines
| [title] Desolder the vibration motors | |
| + | [* icon_note] The next few steps require desoldering and soldering connections. To learn how to solder, check out our [guide|750|soldering guide|new_window=true]—if you've already soldered, you can still find some helpful tips and tricks in this guide! |
| [* black] Flip over the controller and motherboard. | |
| [* black] Use a soldering iron to desolder the vibration motor wires from the motherboard: | |
| [* red] Two red wires | |
| [* black] Two black wires | |
| [* icon_reminder] During reassembly, remember to solder the wires back into the same position. The red wires belong closest to the edge and next to the ***R***s on the motherboard. |