Changes to Step #10
Step Lines
| [title] Remove display housing | |
| [* icon_caution] The inner frame is thin and may be brittle, be careful when removing! | |
| - | [* red] Remove the four (4) 8mm screws from the inside frame using a |
| + | [* red] Remove the four (4) 8mm screws from the inside frame using a T6 Torx bit. |
| [* orange] Lift the inner housing from the bottom. There are 4 clips to dislodge on the edge of the screen. | |
| [* green] The top may be glued to the outer frame, so after you release the clips on the side, you'll want to tilt the inner frame away from you. | |
| [* black] Lift inner housing out and set aside. | |
| - | [* violet] Tilt the display so you can see the under side. Remove the four (4) 7.5mm screws from the bottom using a |
| + | [* violet] Tilt the display so you can see the under side. Remove the four (4) 7.5mm screws from the bottom using a T6 Torx bit to release the hinges. |
| [* light_blue] Life the hinges out from the top and set aside, along with the metal keyboard guide attached to the left. | |
| [* black] You can now tilt out and remove the display from the housing. |