Changes to Step #11
Step Lines
| + | [title] Remove the metal hinge support |
|---|---|
| + | [* black] Remove the two (2) 17.5mm screws securing each display hinge. |
| + | [* black] Once the hinges are removed, remove the single (1) 12mm screw underneath the hinges on each side. |
| + | [* black] Slide out the plastic clips behind each display hinge. |
| + | [* black] Remove the four (4) 4.5mm screws securing the metal hinge support from the lower case. Lift off and set aside. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added