Fix Your Stuff Community Store

Changes to Step #10

Edit by tayola —

Edit approved by guardian10

Before
After
Unchanged

Step Lines

[title] Reconnect red/black cable
-[* black] Make sure the cable is oriented correctly - you can check the port to make sure the holes will line up correctly
-[* black] Align plug - end of cable to port and apply gentle pressure. The cable should slide back into place.
+[* blue] Make sure the cable is oriented correctly - you can check the port to make sure the holes will line up correctly
+[* blue] Align plug - end of cable to port and apply gentle pressure. The cable should slide back into place.
[* black] The circuit board should fit without obstruction.