Changes to Step #8
Edit by Dominik Schnabelrauch —
Edit approved by Dominik Schnabelrauch
- Before
- After
- Unchanged
Step Lines
| [* black] At least the battery is only sled into its plastic housing and we don't have to tangle through adhesive. | |
| [* icon_note] It provides 1.85 Wh (500 mA @ 3.7 V) which will re-juice the earbuds x times. | |
| [* black] The other three wires going to the top section of the case are also soldered on. On there lives a hall sensor reading if the lid is closed or not. | |
| - | [* black] We wonder why Fairphone didn't use any [guide|25629|no-fuss ribbon cable|stepid=64970|new_window=true] or [guide|25629|power|stepid=64976|new_window=true] connectors in here like the ones you can find in [guide| |
| + | [* black] We wonder why Fairphone didn't use any [guide|25629|no-fuss ribbon cable|stepid=64970|new_window=true] or [guide|25629|power|stepid=64976|new_window=true] connectors in here like the ones you can find in [guide|143811|not so much bigger devices|stepid=291107|new_window=true]. The charging case offers enough space and they sit tight enough to not disconnect by accident. Additionally and most important they would've been way more repair friendly. |