How to Fix the C6 Error for a Pressure Cooker Step #11 History

	[title] Test and calibrate a new Instant Pot sensor
-	[* icon_note] The next ~~two steps~~ will give you general guidance on how to test ~~and calibrate~~ a new *high pressure* sensor. ~~Depending on your replacement part and Instant Pot model, this may not work for you.~~
+	[* icon_note] The next step will give you general guidance on how to test a new *high pressure* sensor.
	[* black] Install your replacement pressure sensor and reassemble the Instant Pot.
	[* black] Add 3 cups of water to the Instant Pot and set it to cook on high pressure for five minutes.
	[* icon_caution] If the emergency vent begins to leak or vent during the heating cycle, the pot is over-pressurizing. *Immediately unplug the Instant Pot and perform a quick release. *
	[* black] Once the five minutes are up, vent using quick release.
	[* icon_note] There should be a strong pressure release. If there isn't, the Instant Pot is not reaching sufficient pressure.
	[* icon_note] If the emergency vent didn't leak during the cycle and the quick release vented with strong pressure, your new pressure sensor is working as intended. You don't need to calibrate the sensor.