Changes to Step #2
Step Lines
| [title] Remove Bottom | |
| [* black] Remove 4 screws from the bottom. 3 are normal Phillips, one is a security screw that looks like a 6-sided star with a hole in the center. The bit I used was marked T-20. | |
| + | [* black] Use a Spudger to work around the edges of the metal bottom plate and unclip the plastic tabs holding it in place. There were 7 tabs, 1 in each corner, one in the front and 2 in the back about 1-inch from the center. This was pretty easy. |
| + | [* black] Pull the bottom plate off and set aside. |