Changes to Step #1
Edit by Max Kletskov —
Edit approved by Max Kletskov
- Before
- After
- Unchanged
Step Lines
| + | [title] Removing the base cover |
|---|---|
| + | [* black] 1. Remove the eight screws (M2x3, Torx) that secure the base cover to the palm-rest assembly |
| + | [* blue] 2. With the computer face-down, open the computer at an angle. |
| + | [* blue] 3. Using a plastic scribe, pry the base cover from the palm-rest assembly |
| + | [* yellow] 4. Moving the base cover from left to right, release the clips securing the base cover to the palm-rest assembly. |
| + | [* yellow] 5. Lift the base cover from the palm-rest assembly. |