Changes to Step #15
Edit by Alex Diaz-Kokaisl —
Edit approved by Alex Diaz-Kokaisl
- Before
- After
- Unchanged
Step Lines
| [title] Remove the screen | |
| [* icon_caution] Don't try to remove the screen all the way yet; it's still connected to the frame by a flex cable. | |
| [* black] With the top of the device facing you, pull the screen up and away from you like you're opening a book. | |
| [* black] Rest the screen upside down and parallel to the frame before continuing. | |
| [* icon_caution] Don't twist the screen or move it too far away from the frame to avoid damaging the flex cable. | |
| - | [* icon_reminder] During reassembly, [guide|113604|follow this guide|new_window=true] in case you're using a precut adhesive card. |
| + | [* icon_reminder] During reassembly: |
| + | [* black] This is a good point to power on your tablet and test all functions before sealing it up. Be sure to power your tablet back down completely before you continue working. |
| + | [* black] Remove any adhesive chunks with a pair of tweezers or your fingers. Use some high concentration (over 90%) isopropyl alcohol to wipe away any adhesive residue. |
| + | [* black] If you're using Samsung custom-cut adhesives, [guide|124003|follow this guide|new_window=true]. If you're using double-sided tape, [guide|113604|follow this guide.|new_window=true] |