Fix Your Stuff Community Store

Changes to Step #2

Edit by Jennifer Berg —

Edit approved by Jennifer Berg

Before
After
Unchanged

Step Lines

[title] Create a gap in the seam
-[* black] Apply a suction cup to the rear cover, as close to the heated edge as possible.
-[* black] Pull on the suction cup with strong, steady force to create a gap in the seam.
+[* black] Apply a [product|IF145-361-2|suction handle] to the rear cover, as close to the heated edge as possible.
+[* black] Pull on the suction handle with strong, steady force to create a gap in the seam.
[* black] Insert the point of an [product|IF145-123-2|opening pick] into the gap.
[* black] Repeat this process on all four sides of the phone.
-[* icon_note] Depending on the age of the phone, this may be a difficult step. If you have trouble, go back to Step 1 and use the iOpener again.
+[* icon_note] Depending on the age of the phone, this may be a difficult step. If you have trouble, use the [product|IF145-198-9|iOpener] again.