Fix Your Stuff Community Store

Changes to Step #2

Edit by Alex Diaz-Kokaisl —

Edit approved by Alex Diaz-Kokaisl

Before
After
Unchanged

Step Lines

-[title] Create a gap in the seam
-[* black] Apply a suction handle to the back cover, as close to the heated edge as possible.
-[* black] Pull on the suction handle with strong, steady force to create a gap in the seam.
-[* black] Insert the point of an opening pick into the gap.
-[* icon_note] Depending on the age of the phone, this may be a difficult step. If you have trouble, use the iOpener again.
+[title] Separate the bottom adhesive
+[* black] Apply a suction cup to the back of the phone, as close to the center of the bottom edge as possible.
+[* black] Pull up on the suction cup with strong, steady force to create a gap between the rear cover and the frame.
+ [* icon_note] Depending on the age of your phone, this may be difficult. If you're having trouble, apply more heat to the edge and try again.
+[* black] Insert an opening pick into the gap.