Changes to Step #6
Edit by Dominik Schnabelrauch —
Edit approved by Dominik Schnabelrauch
- Before
- After
- Unchanged
Step Lines
| + | [title] Insert an opening pick |
|---|---|
| + | [* black] Secure a suction handle to the lower half of the front panel, as close to the home button as possible. |
| + | [* icon_note] If the rear glass is cracked, the suction handle may not stick. Try [https://d3nevzfk7ii3be.cloudfront.net/igi/4MmKE22Cy2MavVZU|lifting it with strong tape|new_window=true], or superglue the suction handle in place and allow it to cure so you can proceed. |
| + | [* black] Lift the front panel with the suction handle to create a small gap between the front panel and the frame. |
| + | [* icon_note] If you have trouble creating a gap, apply more heat [link|https://guide-images.cdn.ifixit.com/igi/ZMmt5xqSr46HmYJx.full|to the bottom half of the screen|new_window=true] to further soften the adhesive. Follow the [guide|25705|iOpener|new_window=true] instructions to avoid overheating. |
| + | [* black] Insert an opening pick into the gap you created. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added