Changes to Step #3
Edit by Dominik Schnabelrauch —
Edit approved by Dominik Schnabelrauch
- Before
- After
- Unchanged
Step Lines
| + | [title] Disconnect the home/Touch ID sensor |
|---|---|
| + | [* black] Use an opening tool to pry under the left edge of the home/Touch ID sensor cable connector to disconnect it from its socket. |
| + | [* icon_caution] If the entire connector begins to flip up without separating, press down on the cable at the top edge of the connector with the flat end of a spudger, while simultaneously prying up the left edge of the connector. Be very careful not to damage the cable or connector, or you will permanently disable the sensor. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added