Changes to Step #11
Edit by Alex Diaz-Kokaisl —
Edit approved by Alex Diaz-Kokaisl
- Before
- After
- Unchanged
Step Lines
| + | [title] Cut the adhesive on the right edge |
|---|---|
| + | [* black] Insert a plastic card at the bottom right corner of the battery. |
| + | [* icon_caution] Take care not to puncture or bend the battery with your tool—a punctured or bent battery may leak dangerous chemicals or cause a thermal event. |
| + | [* icon_note] If at any point in this process the adhesive becomes very difficult to cut through, apply an iOpener to that area. |
Image 1
No previous image
Added
Image 2
No previous image
Added