Changes to Step #5
Edit by Alex Diaz-Kokaisl —
Edit approved by Alex Diaz-Kokaisl
- Before
- After
- Unchanged
Step Lines
| + | [title] Disconnect the battery |
|---|---|
| + | [* icon_caution] Be careful when you isolate the battery using a battery blocker. The battery contacts are easily bent or broken, resulting in irreversible damage. |
| + | [* icon_note] Ensure that the iFixit logo on the battery blocker is facing up. |
| + | [* black] Slide the battery blocker underneath the logic board's battery connector at a 35 degree angle. |
| + | [* icon_note] Don't push the battery blocker underneath the connector with excessive force. If you're having trouble fitting the battery blocker underneath the logic board, you can try [guide|143682|using a playing card|new_window=true] to disconnect the battery instead. |
| + | [* icon_note] The battery blocker or playing card ideally should slide under the logic board without encountering any blockages. After insertion, it should rest at about a 15 degree angle. |
| + | [* black] Leave the battery blocker in place as you work. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added