Skip to main content

Changes to Step #39

Edit by Alex Diaz-Kokaisl

Edit approved by Alex Diaz-Kokaisl

Before
After
Unchanged

Step Lines

+[* black] Insert an opening tool near the bottom of the logic board and pry up with a slow and steady force to peel it away from the rear case.
+ [* icon_caution] Bending or warping the logic board could lead to permanent damage. If the adhesive feels extra stubborn, apply more heat and try again.
+ [* icon_note] Slide an opening pick underneath the bottom edge of the logic board to slice some of the adhesive if your logic board won't budge.

Image 1

No previous image

Added

Image 2

No previous image

Added