Changes to Step #21
Edit by Tech Medic —
Edit declined by Jacob Mehnert
- Before
- After
- Unchanged
Step Lines
| [title] Unplug Touch ID and Auxiliary port | |
| - | [* red] Use a |
| - | [* red] Two |
| + | [* red] Use a T3 Torx driver to remove the two screws. |
| + | [* red] Two T3 Torx screws. |
| [* orange] Carefully remove the metal shield. | |
| [* icon_note] Under the metal shield you will find two connectors, carefully unclip them. | |
| [* yellow] The second cable you will disconnect will be lightly adhered so carefully slide a plastic spudger under it and finally unplug it. | |
| [* icon_caution] The adhered cable is very thin and delicate so don't rush it and take your time. |