Changes to Step #27
Edit by Kris Rodriguez —
Edit approved by Kris Rodriguez
- Before
- After
- Unchanged
Step Lines
| [title] Unplug Right Thunderbolt ports | |
| - | [* red] Use a T4 Torx driver to remove the two screws |
| - | [* red] Two T4 Torx screws |
| - | [* orange] Once the screw have been removed carefully remove the metal shield |
| - | [* orange] Under the metal shield there is a connector, carefully unplug it |
| + | [* red] Use a T4 Torx driver to remove the two screws. |
| + | [* red] Two T4 Torx screws. |
| + | [* orange] Once the screw have been removed carefully remove the metal shield. |
| + | [* orange] Under the metal shield there is a connector, carefully unplug it. |