Changes to Step #28
Edit by David Fear —
Edit approved by David Fear
- Before
- After
- Unchanged
Step Lines
| + | [title] Touch bar bracket / Flex |
|---|---|
| [* red] Use a T4 Torx driver to remove the screw. | |
| [* red] T4 Torx screw. | |
| [* orange] Remove the metal shield carefully. | |
| [* yellow] Carefully unplug the connector. | |
| [* icon_note] The two screws that are outlined in yellow are not relevant to this step and are marked on the board itself. For this step, yellow corresponds to the yellow rectangle in the image. |