Changes to Step #32
Edit by David Fear —
Edit approved by David Fear
- Before
- After
- Unchanged
Step Lines
| [* red] Use a T5 Torx driver to remove the six screws securing the logic board. | |
| - | [* red] 8 T5 Torx screws. |
| - | [* orange] Use a T4 Torx driver to remove the six screws securing the logic board. |
| - | [* orange] 3 T4 Torx screws. |
| + | [* orange] Use a T4 Torx driver to remove the three screws securing the logic board. |