Fix Your Stuff Community Store

Changes to Step #3

Edit by Walter Galan —

Edit approved by Walter Galan

Before
After
Unchanged

Step Lines

-[* black] Use the tip of a spudger to flip up the retaining flap securing the microphone ribbon cable to the I/O board.
-[* black] Use the tip of a spudger to remove the volume button ribbon cable from its ZIF connector on the I/O board.
+[* black] Use the tip of a spudger to carefully flip up the retaining flap on the microphone ribbon cable ZIF socket.
+[* icon_caution] Make sure you are flipping up the retaining flap, ***not*** the socket itself.