Changes to Step #4
Edit by Arthur Shi —
Edit approved by Arthur Shi
- Before
- After
- Unchanged
Step Lines
| [title] Align the adhesive | |
| [* icon_caution] Be very careful with this step, as misaligning the adhesive can cause it to peek out of the phone during reassembly, leading to an improper seal. | |
| + | [* icon_caution] The adhesive is very sticky—be careful with alignment, as you won't be able to reposition the adhesive once it sticks. |
| [* black] Carefully align ***the sticky side*** of the adhesive over the edges of the frame. | |
| [* icon_note] You can use the screw holes to help line up the adhesive. | |
| - | [* black] Press down on the perimeter of the adhesive strip to bond it to the |
| + | [* black] Press down on the perimeter of the adhesive strip to bond it to the frame. |