Fix Your Stuff Community Store

Changes to Step #4

Edit by Alex Diaz-Kokaisl —

Edit approved by Alex Diaz-Kokaisl

Before
After
Unchanged

Step Lines

[title] Align the adhesive
[* icon_caution] Be very careful with this step, as misaligning the adhesive can cause it to peek out of the phone during reassembly, leading to an improper seal.
-[* icon_caution] The adhesive is very sticky—be careful with alignment, as you won't be able to reposition the adhesive once it sticks.
+[* icon_caution] The adhesive is very sticky! Be careful with alignment, as you won't be able to reposition the adhesive once it sticks.
[* black] Carefully align ***the sticky side*** of the adhesive over the edges of the frame.
[* icon_note] You can use the screw holes to help line up the adhesive.
[* black] Press down on the perimeter of the adhesive strip to bond it to the frame.