Changes to Step #6
Edit by Arthur Shi —
Edit approved by Arthur Shi
- Before
- After
- Unchanged
Step Lines
| - | [* black] Align the bottom cover with its original position on the frame. |
|---|---|
| - | [* black] Press down on the perimeter of the adhesive to bond the adhesive to the bottom cover. |
| + | [* black] This is a good point to power on your phone and test all functions before sealing it up. Be sure to power your phone back down completely before you continue working. |
| + | [* black] Align the back cover with its original position on the frame. |
| + | [* black] Press down on the perimeter of the adhesive to bond the adhesive to the back cover. |
| [* icon_reminder] To ensure a good seal, apply constant pressure to the back cover with a flat, heavy object. A hefty book works well. | |
| + | [* icon_note] If a substantial gap remains, try squeezing the gap with your fingers ***but don't force it***. Pry the back cover off and check for any surface irregularities, such as unseated connectors or loose and jutting screws. |