Fix Your Stuff Community Store

Changes to Step #6

Edit by Alex Diaz-Kokaisl —

Edit approved by Alex Diaz-Kokaisl

Before
After
Unchanged

Step Lines

-[* black] This is a good point to power on your phone and test all functions before sealing it up. Be sure to power your phone back down completely before you continue working.
+[* icon_note] This is a good point to power on your phone and test all functions before sealing it up. Be sure to power your phone back down completely before you continue working.
[* black] Align the back cover with its original position on the frame.
[* black] Press down on the perimeter of the adhesive to bond the adhesive to the back cover.
[* icon_reminder] To ensure a good seal, apply constant pressure to the back cover with a flat, heavy object. A hefty book works well.
[* icon_note] If a substantial gap remains, try squeezing the gap with your fingers ***but don't force it***. Pry the back cover off and check for any surface irregularities, such as unseated connectors or loose and jutting screws.