Fix Your Stuff Community Store

Changes to Step #2

Edit by Arthur Shi —

Edit approved by Arthur Shi

Before
After
Unchanged

Step Lines

-[* black] Before removing any liners, position the adhesive strip over the back cover to find the proper orientation.
+[* black] Before removing any liners, position the adhesive strip with the ***clear liner facing down ***over the frame to find the proper orientation.
[* icon_note] You can use the rear camera cutout as a reference point.
+[* black] If the adhesive matches the back cover instead of the frame, follow this [guide|152860|cover-first adhesive guide].