Changes to this Step
Edit by Dominik Schnabelrauch —
Edit approved by Dominik Schnabelrauch
- Before
- After
- Unchanged
Step Lines
| [title] Insert an opening pick | |
| - | [* black] Apply a suction handle to the bottom edge of the |
| + | [* black] Apply a suction handle to the bottom edge of the screen, while avoiding the very edge of the glass. |
| [* black] Pull up on the suction handle with firm, constant pressure to create a slight gap between the front panel and rear case. | |
| [* black] Insert an opening pick into the gap. | |
| [* icon_note] The watertight adhesive holding the display in place is very strong; creating this initial gap takes a significant amount of force. If you're having a hard time opening a gap, apply more heat, and gently rock the screen up and down to weaken the adhesive until you create enough of a gap to insert your tool. |