Changes to Step #6
Edit by Tobias Isakeit —
Edit approved by Tobias Isakeit
- Before
- After
- Unchanged
Step Lines
| + | [title] Remove the front sensor assembly |
|---|---|
| + | [* icon_note] At this point, the adhesive may have cooled down. If so, apply a heated iOpener to the assembly for one minute before continuing. |
| + | [* black] Insert an opening pick under the left side of the front sensor assembly. |
| + | [* black] Slide the pick under the assembly to separate it from the frame. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added