Changes to Step #15
Edit by Andrew Bookholt —
- Before
- After
- Unchanged
Step Lines
| [* black] Lift the logic board enough to gain clearance and use a spudger to pry the microphone up off the upper case. | |
| - | [* black] Lift the logic board assembly out of the upper case. |
| + | [* black] Slide the logic board away from the port openings and lift the assembly out of the upper case. |
| + | [* icon_reminder] Before reinstalling the logic board, it is easiest to press the microphone down into its housing in the left speaker to keep it in place. |