Changes to Step #3
Edit by Arthur Shi —
Edit approved by Arthur Shi
- Before
- After
- Unchanged
Step Lines
| [title] Remove the camera bezel | |
| [* black] Lift the camera bezel from the phone and remove it. | |
| [* icon_reminder] During reassembly: | |
| [* black] This is a good point to power on your phone and test all functions before sealing it up. Be sure to power your phone back down completely before you continue working. | |
| - | [* icon_note] If you are replacing the fingerprint sensor |
| + | [* icon_note] If you are replacing the fingerprint sensor or screen assembly, use [guide|154616|this guide|new_window=true] to calibrate the fingerprint sensor. |
| [* black] Remove any adhesive chunks with a pair of tweezers or your fingers. Apply heat if you're having trouble separating the adhesive. | |
| [* black] Follow [guide|154434|this guide|new_window=true] to replace the back cover and camera bezel adhesive. |