Motherboard Cover Removal Step #3 History - iFixit

Changes to Step #3

Edit by Arthur Shi — Nov 9, 2022

Edit approved by Arthur Shi

: Before
: After
: Unchanged

Step Lines

	[title] Remove the camera bezel
	[* black] Lift the camera bezel from the phone and remove it.
	[* icon_reminder] During reassembly:
	[* black] This is a good point to test your phone's functionality before sealing it up. Use [guide\|154941\|this guide\|new_window=true] to run a hardware test. Be sure to power your phone back down completely before you continue working.
-	[* ~~icon_note~~] If you are replacing the fingerprint sensor or screen assembly, use [guide\|154616\|this guide\|new_window=true] to calibrate the fingerprint sensor.
+	[* black] If you are replacing the fingerprint sensor or screen assembly, use [guide\|154616\|this guide\|new_window=true] to calibrate the fingerprint sensor.
	[* black] Follow [guide\|154434\|this guide\|new_window=true] to replace the back cover and camera bezel adhesive.