Changes to Step #6
Edit by Spencer Day —
Edit approved by Spencer Day
- Before
- After
- Unchanged
Step Lines
| [* black] Remove the battery from the midframe. | |
| [* icon_caution] Do not reuse the battery if it has been deformed or damaged, as doing so is a potential safety hazard. Replace it with a new battery. | |
| - | [* icon_reminder] During reassembly: |
| - | [* black] If there's any alcohol remaining, use a lint-free cloth to wipe it up or allow the alcohol to dry off before installing a new battery. |
| - | [* black] Temporarily reconnect the battery connector to the motherboard socket. This ensures that the battery is properly aligned in its recess. |
| - | [* black] Adhere the battery, disconnect it, and continue reassembling your device. |
| - | [* black] [guide|113604|Follow this guide|new_window=true] if you are using a pre-cut adhesive card. |
| - | [* black] [guide|126585|Follow this guide|new_window=true] to install custom-cut adhesives for your device. |
| + | [* icon_reminder] Follow [guide|154497|this guide|new_window=true] to replace the battery adhesive. |