Changes to Step #4
Edit by Spencer Day —
Edit approved by Spencer Day
- Before
- After
- Unchanged
Step Lines
| [title] Insert an opening pick | |
| - | [* black] Insert wisdom here. |
| + | [* black] Once the screen is hot to the touch, apply a suction handle to the bottom of the screen as close to the edge as possible. |
| + | [* icon_note] If your screen is badly cracked, covering it with a layer of clear packing tape may allow the suction cup to adhere. Alternatively, very strong tape may be used instead of the suction handle. If all else fails, you can superglue the suction cup to the screen. |
| + | [* black] Pull up on the suction handle with a strong, steady force to create a small gap between the screen and the frame. |
| + | [* icon_note] The display adhesive is very strong and this may take multiple attempts. If you are having trouble reheat the screen and try again. |
| + | [* black] Insert an opening pick into the gap between the frame and the screen. |