Fix Your Stuff Community Store

Changes to Step #12

Edit by Clay Eickemeyer —

Edit approved by Clay Eickemeyer

Before
After
Unchanged

Step Lines

-[title] Insert another opening pick
-[* black] Insert an opening pick in the gap at the top of the right edge.
+[title] Separate the corner adhesive
+[* black] Insert an opening pick in the gap at the top right edge.
[* black] Angle the pick upward by 30 degrees and rotate it around the top right corner.
+ [* icon_caution] Be careful while slicing around the corners, as the glass is very fragile here. Work slowly to avoid cracking the glass.