Changes to Step #6
Edit by Clay Eickemeyer —
Edit approved by Clay Eickemeyer
- Before
- After
- Unchanged
Step Lines
| [title] Slice the left adhesive | |
| [* black] Insert a second opening pick at the bottom left corner. | |
| - | [* black] Slide the pick to the camera bezel to slice the adhesive. |
| + | [* black] Slide the pick to the bottom of the camera bezel to slice the left adhesive. |
| [* icon_caution] Only insert the pick up to 5 mm, as you may damage the antenna flex cable or the power button cable. | |
| [* black] Leave the pick in the left edge to prevent the adhesive from resealing. |