Changes to Step #11
Edit by Chayton Ritter —
Edit approved by Chayton Ritter
- Before
- After
- Unchanged
Step Lines
| [* black] Insert a new opening pick to the right of the ambient light sensor. | |
| - | [* black] |
| + | [* black] Slide the pick along the middle section of the top, stopping when you reach the left ambient light sensor. |
| [* icon_caution] Don't insert the pick more than 1 mm or you'll damage the camera module. | |
| [* black] Leave the pick in to prevent the adhesive from re-sealing. |