Changes to Step #2
Edit by Chayton Ritter —
Edit approved by Chayton Ritter
- Before
- After
- Unchanged
Step Lines
| - | [title] Slice the USB-C cable adhesive |
|---|---|
| - | [* icon_note] The USB-C port cable is secured to the logic board with some weak adhesive. |
| - | [* black] Insert an opening pick under the USB-C cable. |
| - | [* black] Slice the adhesive securing the cable to the logic board. |
| + | [title] Separate the USB-C cable adhesive |
| + | [* icon_note] The USB-C port cable is secured to the logic board with weak adhesive. |
| + | [* black] Slide an opening pick between the cable and the logic board to separate the adhesive. |