Fix Your Stuff Community Store

Changes to Step #16

Edit by Chayton Ritter —

Edit approved by Chayton Ritter

Before
After
Unchanged

Step Lines

-[title] Apply isopropyl alcohol
+[title] Apply isopropyl alcohol to the logic board
[* icon_note] The adhesive that secures the logic board is very strong. To remove the board, you must first weaken the adhesive using high-strength (>90%) isopropyl alcohol.
-[* black] Elevate the left side of the iPad so that it lays down at an angle.
+[* black] Prop the left side of the iPad up against an object so the isopropyl alcohol can flow under the logic board.
[* black] Apply isopropyl alcohol along the left edge of the logic board.
+[* black] Let the alcohol soak for one minute to soften the adhesive under the logic board.